Azur · activated charcoal
26.6 cm · 22 pleats · 450 g/m²
Activated charcoal with antibacterial-treated filter media to help limit bacterial growth within the filter.
Adjust the pleats to a suitable metal support, then cut the media to size. Keep the metal grease filter in place and check motor-side clearance and airflow.
1 filter included. Clips sold separately.
View FC116 clips →
Azur filter media shown. Supplied size: PM, 22 pleats.
FAC FC115 · PM
Activated charcoal with an antibacterial treatment that helps limit bacterial growth within the filter media.
Made in France in an ESAT supported employment workshop. Trim the media to fit the usable area of your support.
Compare the three colors↗Activated charcoal, with depth
The pleats increase the media’s contact area with the air. Its layered structure holds crushed activated charcoal to help retain cooking odors in recirculation mode.
Unfold the media, then cut it to size. PM has 22 pleats and a fixed width of 26.6 cm.
Installation direction: Fit with the blue side towards the motor.
Charcoal media you can cut to fit
The charcoal media can be cut for other air-filtration systems with a housing designed for a compatible activated charcoal sheet, such as an air conditioner, a deep fryer with an odour-filter compartment, a vacuum cleaner or a ventilation unit.
Suitability depends on your appliance. The appliance instructions must permit this type of media. Check the dimensions, thickness, temperature, airflow and fittings. Keep the filter securely inside its intended housing without obstructing ventilation.
In a vacuum cleaner, it can complement a suitable odour-filter stage; it does not replace a dust filter, motor filter or HEPA filter. In a deep fryer, use only the intended filter compartment, away from oil, food and heating elements. FC116 clips are intended for compatible metal cooker hood frames.
Send your appliance model number and a photo of the filter housing if you would like us to check the proposed fit.

FC116 fixing clips · Pack of 16
03 / Secure the media
On a compatible frame, FAC FC116 clips hold the media against the metal grease filter. If the housing already holds the media securely and clearance is limited, installation without clips may be suitable after checking your cooker hood.
With clips: use 8 per filter. A pack of 16 is enough for two filters.
Clips are sold separately from filters. The metal support is not included. Check that the clips fit your frame.
View the pack of 16 clips↗Install in three steps
Keep your cooker hood’s metal grease filter in place: it supports the charcoal media.
Measure the usable area and check the clearance on the motor side.
Gently open the accordion pleats, then cut the media to the dimensions needed. Follow the installation direction for your chosen colour.
Distribute the clips along both sides of the frame. Without clips, the housing must hold the media securely, away from the motor and without restricting ventilation. Check the fit, then refit the frame as instructed in the cooker hood manual.
1 Azur PM pleated filter, FAC FC115. FC116 clips and the metal grease filter are not included.
Choose with confidence
For recirculating cooker hoods with a suitable metal support. Check dimensions, clearance and fittings. It is not a direct replacement for a round bayonet-fit filter.
Each filter reference includes one piece of pleated charcoal media. The metal support is not included. FC116 clips are sold separately in packs of 16.
Safran: charcoal side towards the motor. Azur: blue side towards the motor. For Graphite, follow the orientation shown in the instructions. Also follow your cooker hood manual.
Replacement frequency depends on how much you cook and use the hood. Follow the instructions and replace the media when it is saturated or cooking odours persist.
Unsure about your support? Send us a photo before ordering.
Have my cooker hood checked↗