A universal pleated charcoal filter is cut and fitted to the metal support of a cooker hood operating in air recirculation mode. It allows the filter media to be adapted to the available housing. FAC is made in France in ESAT, in two formats and three treatments.

See universal filters, sizes and prices

1. Choose PM or GM according to the grilles of the cooker hood

  • cooker hood 60 cm with two metal grease filters: PM. The small model has a width of 26,6 cm and 22 pleats.
  • cooker hood 60 cm with a single large metal grease filter: GM. The large model has a width of 40 cm and 48 pleats.
  • cooker hood 90 cm with two or three metal grease filters: GM. The media is then adjusted by cutting and spacing the pleats in accordion.

Remove the media according to the cooker hood instructions and mark the useful surface of the media and the space available on the motor side before installing the cooker hood.

cooker hood 60 cm, two grease filters: size PMcooker hood 60 cm, two grease filters: PM.cooker hood 60 cm, one large grease filter: size GMcooker hood 60 cm, one large grease filter: GM.cooker hood 90 cm, two or three grease filters: size GMcooker hood 90 cm, two or three grease filters: GM.

2. Adjust the pleats in accordion, without looking for a single unfolded length

The filter opens like an accordion. For the same frame area, tighter pleats keep more filter media on the support. Stretching the filter flattens the pleats and reduces the amount of media per unit of area.

The resulting length therefore depends on the pleat spacing. Adjust the pleats to your metal filter, then cut the required media. Maintain suitable airflow and check that the assembly stays securely in place when the frame is refitted.

For the same frame area, tighter pleats retain more media; stretched pleats become flatterIllustrative diagram: tighter pleats on the left, more open pleats on the right, over the same frame area.

3. Choose Graphite, Safran or Azur

  • Graphite grey: 350 g/m². The essential choice, at the most affordable price, for everyday odors.
  • Safran yellow: 450 g/m². The enhanced anti-odor treatment is particularly suitable for frequent cooking of fish, garlic, spices or frying.
  • Azur blue: 450 g/m². The media is treated with an antibacterial agent, which is applied to the filter; it does not disinfect the room.

The size and color answer to two different choices: start with the support, then choose the treatment suitable for your use.

4. Maintain the media: with or without clips

The metal grease filter of the cooker hood is preserved. On a compatible frame, the clips FAC FC116 maintain the charcoal medium. The batch includes 16 clips; the pose shown in the range uses eight clips per filter.

Some narrow housings may hold the media securely without clips. The media sits between the metal filter and motor, without touching moving parts or restricting ventilation. Whether this arrangement is suitable depends on the cooker hood housing.

If you already have clips or another suitable means of support, choose the filter alone. If clips are needed, the product page lets you add filters and packs of clips together, showing the total before they are added to the cart. Check the quantities in your cart.

5. Orienting the filter and maintaining the cooker hood

For Safran, place the carbon face towards the engine. For Azur, turn the blue side towards the engine. For Graphite, follow the direction indicated in the instructions provided. Also follow the instructions of the cooker hood.

Replace charcoal media when it is saturated or odors persist. The interval depends on your cooking and cooker hood use. It does not replace maintenance of the metal grease filter and must not be washed unless the manufacturer explicitly permits this.

Choose my universal filter FAC · Have a pose checked by photo

Frequently asked questions: cooker hood 60 or 90 cm and pleated media

A cooker hood of 60 cm always use the PM ?

No. The PM is the reference for a cooker hood of 60 cm with two metal grease filters. If there is only one large grease filter on a cooker hood measuring 60 cm, start with the GM. The format is chosen with the support, then adjusted by cutting and spacing the pleats in accordion.

What is the difference between the size and the color?

PM or GM concerns the support. Graphite, Safran and Azur respond to the choice of the media: Graphite 350 g/m² ; Safran 450 g/m² with an additional odor-control treatment; Azur 450 g/m² with antibacterial-treated media.

Does the pleated filter directly replace a round filter?

No. It fits a suitable metal support; it is not a cassette or round filter that locks directly onto the motor. Check the housing and attachment before changing filter types.

Should I stretch the pleats all the way out?

No. Opening the pleats fully is not the aim. Tighter pleats keep more media over the same support area. Fit them to the frame without restricting airflow.

Flat or pleated charcoal filter: see comparison · Choose my size and color