How to change the filters of the cooker hood?

Why replace a charcoal filter?

To maintain a high-performance cooker hood, it is advisable to replace the charcoal filters every 3 To 4 month depending on your cooking frequency.

Unlike metal grease filters, activated charcoal filters generally cannot be cleaned.

Over time, activated charcoal becomes saturated and absorbs cooking odors and fumes less effectively.

Regular replacement keeps your kitchen suction and air quality better.

Finding the right reference

You kept the old filter but its reference is illegible? Compare its shape, dimensions and attachment to find a cooker hood filter before choosing the replacement part.

To ensure the proper functioning of your cooker hood, it is important to choose a filter compatible with your model.

The reference of your cooker hood is usually found:

  • On the purchase invoice
  • In the instructions for use
  • On the cooker hood type plate

With the search engine of FiltreCharbon.com, you can quickly find the filter compatible with your device.

Installation filter cooker hood

Material requirements

  • A screwdriver
  • A new compatible filter
  • About ten minutes

Before any intervention, remember to unplug your extractor cooker hood.

Steps to Replace Your Filter

1. Remove the metal filters

Unclip the metal filters under the cooker hood to access the filtration system.

2. Identify the type of filter

Square or rectangular filters are usually located just above the metal filters.

The round filters, on the other hand, are attached directly to the motor of the cooker hood.

3. Remove the old filter

For some models, the filter cover must be opened by turning the side fasteners.

Then turn the central fixing a quarter of a turn to remove the used filter.

4. Install the new filter

Place the new compatible filter in the intended location.

Square filters usually clip directly, while round filters need to be turned to lock properly.

5. Close and re-install the grilles

Replace the central fixing and close the filter cover if necessary.

All that remains is to clip the metal filters under the cooker hood.

Council interview

While charcoal filters need to be replaced, metal grease filters can be cleaned regularly to improve the performance of your cooker hood.

Regular maintenance also helps to limit the accumulation of grease in the engine and ducts.

Need help finding your filter?

Send us a photo of your cooker hood, old filter or type plate and our team will help you quickly identify the right compatible model.

filtrecharbon@gmail.com

An original filter not found? Think of the universal pleated media.

For a cooker hood with air recirculation mode equipped with a suitable metal grease filter, the range FAC Check the engine side space and support before choosing; this is not a direct replacement of all cassettes; the case is not a replacement for the original cassette.

PM : cooker hood de 60 cm with two metal grease filters. GM : cooker hood de 60 cm with one large grease filter, or 90 cm with two or three grease filters.

Graphite 350 g/m² for everyday cooking odors; Safran 450 g/m² with an additional odor-control treatment; Azur 450 g/m² with antibacterial-treated media. Filters made in France in an ESAT. Clips optional depending on the pose.

Compare Universal Filters PM and GM · See the choice and installation guide

The reference is still not found?

The dedicated guide distinguishes the search for a cassette or a round filter and the conditions necessary to consider a pleated universal media.

See solutions for a filter not found · Compare flat media and pleated media